8 9
- The On/Off & Stimulation Dial is used to turn the YS300
on/off and to select the stimulation level.
- Set the dial to "OFF" to turn off the YS300.
- Set the dial to "P" for the Pager vibration only mode.
- The YS300 has stimulation levels 2 (lowest) through 7
(highest). Each stimulation level begins with a vibration
and is followed by the stimulation.
- Set the dial to "T' to test the YS300. See TESTING THE
YS300 on page 11 to check if your unit is working
properly.
On/Off & Stimulation Dial Function
OFF Power Off
P Pager Vibration
2~7 Stimulation Level
T Test Mode
Note: When first using the YS300, it is recommended to
start at the lowest stimulation level. If your dog continues
to bark, gradually increase the stimulation level. Closely
monitor your dog’s reaction to find the right stimulation
level for you dog.
USING THE ON/OFF &
STIMULATION DIAL
To Next Page
Loading...
