12
Intended use
Electric saws
This electric saw may be used only for sawing wood.
It is intended for occasional use in thin wood, caring
for fruit trees, felling, removing limbs, and trimming to
length.
Persons who may not sue the saw:
This saw must not be used by persons who are not
familiar with this instruction manual, children, young
people, or anyone under the infl uence of alcohol, drugs
or medication.
General Power Tool Safety Warnings
GEA010-1
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fi re and/or
serious injury.
Save all warnings and instructions for future
reference.
Chain saw safety warnings
1. Keep all parts of the body away from the saw
chain when the chain saw is operating. Before
you start the chain saw, make sure the saw
chain is not contacting anything. A moment of
inattention while operating chain saws may cause
entanglement of your clothing or body with the saw
chain.
2. Always hold the chain saw with your right hand
on the rear handle and your left hand on the
front handle. Holding the chain saw with a reversed
hand confi guration increases the risk of personal
injury and should never be done.
3. Hold the power tool by insulated gripping
surfaces only, because the saw chain may
contact hidden wiring or its own cord. Saw
chains contacting a “live” wire may make exposed
metal parts of the power tool “live” and could give
1 2
3
4
5
Minimum delivery inventory
1. Electric chain saw
2. Guide bar
3. Saw chain
4. Cord grip for electric cord
5. Chain protection cover
6. Instruction manual (not shown)
In the case that one of the parts listed should not be
included in the delivery inventory, please, consult your
sales agent.
EC Declaration of Conformity
The undersigned, Tamiro Kishima and Rainer
Bergfeld,as authorized by DOLMAR GmbH,
declare that the DOLMAR machines:
Designation of Machine: Chain Saw
Model No./ Type: ES-153 A, ES-163 A, ES-173 A, ES-
183 A, ES-2130 A, ES-2135 A, ES-2140 A, ES-2145 A
Specifi cations: see “TECHNICAL DATA” table.
are of series production and
Conforms to the following European Directives:
2000/14/EC, 2006/42/EC
And are manufactured in accordance with the following
standards or standardised documents:
EN60745
The EC-Type Examination Certifi cate No.
M6A 12 10 24243 118
M6A 12 10 24243 119
The EC-Type Examination per 98/37/EC and
2006/42/EC was performed by:
TÜV SÜD Product Service GmbH,
Ridlerstraße 65, 80339 MÜNCHEN, Germany
Identifi cation No. 0123
The technical documentation is on fi le at:
DOLMAR GmbH,
Jenfelder Straße 38, Abteilung FZ,
D-22045 Hamburg
The conformity assessment procedure required by
Directive 2000/14/EC was in Accordance with annex V.
Measured Sound Power Level: 101.8 dB
Guaranteed Sound Power Level: 103 dB
7.11.2012
Tamiro Kishima Rainer Bergfeld
Managing Director Managing Director
To Next Page
Loading...
