17
ES-153 A
ES-2130 A
ES-163 A
ES-2135 A
ES-173 A
ES-2140 A
ES-183 A
ES-2145 A
Chain type 092 (91VG)/492 (91PX)
Chain pitch inch 3/8”
Length of a cut cm 30 35 40 45
Max. chain speed m/s 13.3
Sound power level L
WA av
per EN 60745
dB (A) 101.8
Sound pressure level L
pA av
at the workplace per EN 60745
dB (A) 90.8
Uncertainty dB (A) K=0.73
Vibration acceleration a
h,w av
per EN 60745
- Tubular handle m/s
2
4.7
- Rear handle m/s
2
5.6
Uncertainty m/s
2
K=1.5
Oil pump automatic
Oil tank capacity ml 140
Power transmission direct
Overload protection electrical
Chain brake manually actuated
Run-out brake electrical
Weight
(Weight according to EPTA-
Procedure 01/2003)
kg 5.0 5.1 5.2 5.3
Protective case class II (double protective insulation)
Extension cable
(not included)
DIN 57282/ HO 7RN-F
L= 30 m max., 3x1.5 mm
2
Due to our continuing programme of research and development, the specifi cations herein are subject to change •
without notice.
Specifi cations may diff er from country to country.•
The declared vibration emission value has been measured in accordance with the standard test method and may be •
used for comparing one tool with another.
The declared vibration emission value may also be used i n a preliminary assessment of exposure.•
WARNING:
The vibration emission during actual use of the power tool can diff er from the declared emission value depending on •
the ways in which the tool is used.
Be sure to identify safety measures to protect the operator that are based on an estimation of exposure in the actual •
conditions of use (taking account of all parts of the operating cycle such as the times when the tool is switched off
and when it is running idle in addition to the trigger time).
Technical data
To Next Page
Loading...
