Dolmar ES-2140 A - Accessories; EU Conformity Declaration

23
Extract from the spare parts list
Use original DOLMAR spare parts only. For performance of repairs and for
replacement of other components your DOLMAR service centre should be
consulted.
Pos. DOLMAR No. Qty. Denominatio
1 226 114 100 1 Oil tank cap compl.
2 226 213 200 1
Sprocket guard compl.
3 970 805 410 2 Carbon brushes
4 412 030 661 1 Sprocket nose bar 30 cm (12")
4 412 035 661 1 Sprocket nose bar 35 cm (14")
4 412 040 661 1 Sprocket nose bar 40 cm (16")
4 412 045 661 1 Sprocket nose bar 45 cm (18")
5 528 092 046 1 Saw chain 3/8", 30 cm
5 528 092 052 1 Saw chain 3/8", 35 cm
5 528 092 056 1 Saw chain 3/8", 40 cm
5 528 092 062 1 Saw chain 3/8", 45 cm
6 952 010 130 1 Chain protection cover (30-35 cm)
6 952 010 140 1 Chain protection cover (40-45 cm)
Accessories (not included in the delivery inventory)
20 953 100 090 1 Chain gauge 3/8”
21 953 004 010 1 File handle
22 953 003 090 1 Round Þ le ø 4 mm
23 953 003 060 1 Flat Þ le
24 953 030 010 1 File holder compl. 3/8”
ES-2130 A, ES-2135 A
ES-2140 A, ES-2145 A
EU Conformity Declaration
The undersigned, Tamiro Kishima and Rainer Bergfeld, as authorized by DOLMAR GmbH, declare that the DOLMAR machines,
Type: 226 EU prototype test certiÞ cate No.
ES-2130 A M6 06 07 24243 068
ES-2135 A M6 06 07 24243 068
ES-2140 A M6 06 07 24243 068
ES-2145 A M6 06 07 24243 068
manufactured by DOLMAR GmbH, Jenfelder Str. 38, 22045 Hamburg, Germany, conforms to the basic safety and health require-
ments of the applicable EU guidelines:
EU Machinery Directive 98/37/EG, EU EMC Directive 2004/108/EG, Outdoor Noise Directive 2000/14/EG. Starting on 29 Dec.
2009, Guideline 2006/42/EG will come into force, replacing Guideline 98/37/EG. This product meets the requirements of the new
Guideline.
The most important standards applied to properly meet the requirements of the above EU Directive were: EN 60745-2-13, EN 61000-
3-2, EN 61000-3-3, EN 55014-1, EN 55014-2.
The conformity assessment procedure 2000/14/EG was performed per Annex V. The measured sound power level (L
WA
) is 101,8
dB(A). The guaranteed sound power level (L
d
) is 103 dB(A).
The EU-Type-Examination Certificate was performed by: TÜV Süd Product Service GmbH, Zertifizierungsstelle, Ridler-
str. 31, D-80339 München. The technical documentation is on Þ le at DOLMAR GmbH, Jenfelder Straße 38, Abteilung FZ,
D-22045 Hamburg.
Hamburg, 15.5.2008
For DOLMAR GmbH
Tamiro Kishima Rainer Bergfeld
Managing Director Managing Director