27
EU Conformity Declaration
The undersigned, Tamiro Kishima and Rainer Bergfeld, as authorized by DOLMAR GmbH, declare that the DOLMAR machines,
Type: 172 EU prototype test certiÞ cate No.
Chain saw PS-3410 4811004.12002
manufactured by DOLMAR GmbH, Jenfelder Str. 38, 22045 Hamburg, Germany, conforms to the basic safety and health require-
ments of the applicable EU Directives:
EU Machinery Directive 2006/42/EG, EU EMC Directive 2004/108/ EG, Outdoor Noise Directive 2000/14/EG.
The most important standards applied to properly meet the requirements of the above EU Directive were: EN ISO 11681-1, EN ISO
11681-2, EN 14982, EN 61000-4-2, EN 61000-4-3, CISPR 12.
The conformity assessment procedure 2000/14/EG was performed per Annex V. The measured noise level (L
wa
) is 106 dB(A). The
guaranteed noise level (L
d
) is 108 dB(A).
The EU Type-Examination CertiÞ cate was performed by: DEKRA Testing and CertiÞ cation GmbH (2140), Enderstraße 92 b, D-01277
Dresden.
The technical documentation is on Þ le at DOLMAR GmbH, Abteilung FZ, Jenfelder Straße 38, 22045 Hamburg, Germany.
Hamburg, 20.6.2012
For DOLMAR GmbH
Tamiro Kishima Rainer Bergfeld
Managing Director Managing Director
To Next Page
Loading...
