Dolmar PS-32 User Manual

PS-32
PS-32 TLC
PS-32 C
PS-32 C TLC
Original Instruction Manual
Instructions d’emploi d’origine
Originalbetriebsanleitung
Manuale di istruzioni originale
Originele gebruiksaanwijzing
Instrucciones de manejo originales
Instruções de serviço original
Original brugsanvisning
Πρωτότυπο εγχειρίδιο οδηγιών
Important:
Read this instruction manual carefully before putting the chain saw into operation and strictly observe the safety regulations!
Keep this instruction manual!
Attention:
Lire attentivement ce ma nu el avant la première mise en service et observer impérativement les consignes de sécurité!
Garder avec soins le manuel des instructions d’emploi!
Achtung:
Lesen Sie vor der ersten Inbetriebnahme diese Betriebsanleitung gründlich durch und befolgen Sie unbedingt die
Sicherheitsvorschriften! Betriebsanleitung sorgfältig aufbewahren!
Attenzione:
Osservare attentamente le norme di sicurezza. Errori nell’uso della motosega possono essere causa di incidenti.
Conservare accuratamente le istruzioni d’impiego!
Belangrijk:
Lees voor de eerste in bedrijfname deze gebruiks aan wijzing zorgvuldig door en neem alle veilig heidsvoorschriften in acht.
Gebruiks aan wijzing zorgvuldig bewaren!
Atención:
Es indispensable leer con mucha atención las instrucciones de manejo antes de utilizar la motosierra por primera vez.
¡Preste especial aten ción a las recomendaciones de seguri dad! Conservar cuidadoso los instrucciones de manejo.
Atenção:
Antes da primeira colocação em serviço, ler atentamente estas instruções de serviço e seguir sem falta as normas de
segurança! Guardar bem as instruções de serviço!
Obs:
Læs venligst denne betjeningsvejledning om hyg ge ligt inden maskinen ta ge s i brug og overhold under alle omstændig heder
sikker heds reglerne. Opbevar betjenings vej ledning omhyggeligt.




Dolmar PS-32 Specifications

General

Weight	4.1 kg
Power Source	Petrol
Chain Pitch	3/8"
Power Output	1.35 kW
Bar Length	35 cm
Fuel Tank Capacity	0.4 L
Oil Tank Capacity	0.28 L
Type	Chainsaw
Chain Gauge	0.050 inch
Recommended Bar Length	35 cm

Summary

Safety Instructions

Intended Use

Personal Protective Equipment

Details on necessary personal protective equipment (PPE) for chainsaw operation, including head, eye, ear, hand, and foot protection.

Operating Fluids and Tank Filling

Information on fuel and oil types, safe refueling procedures, and environmental protection during refilling.

Kickback

Work Behaviour and Technique

Transport and Storage

Maintenance

Starting Up

7a. For models with fixed nuts on sprocket cover

7a-1. Mounting guide and saw chain

7a-2. Tensioning the saw chain

Procedure for adjusting the saw chain tension for optimal performance and safety.

7a-3. Checking chain tension

How to check and verify the correct tension of the saw chain.

7a-4. Re-tensioning the saw chain

Instructions on how to re-tension the saw chain if it becomes slack.

7b. For QuickSet guide bar

7b-1. Mounting guide and saw chain (QuickSet)

7b-2. Tensioning the chain (QuickSet)

How to adjust chain tension using the QuickSet mechanism.

7b-3. Checking chain tension (QuickSet)

Checking the chain tension for the QuickSet guide bar.

7b-4. Re-tensioning the chain (QuickSet)

7c. For models with quick tensioner (TLC)

7c-1. Mounting guide and saw chain (TLC)

7c-2. Tensioning the saw chain (TLC)

7c-3. Checking chain tension (TLC)

7c-4. Re-tensioning the chain (TLC)

7-5. Chain Brake

Information on the chain brake's function, operation, and safety precautions.

7-6. Fuels

Details on fuel types, mixture ratios, and safe handling of gasoline and oil.

7-7. Saw Chain Oil

7-8. Filling Fuel and Chain Oil

Instructions for safely filling the fuel and chain oil reservoirs.

7-9. Checking Chain Lubrication

7-10. Adjusting Chain Lubrication

7-11. Starting the Engine

Step-by-step instructions for starting the chainsaw engine, including cold and warm start procedures.

7-13. Checking the Chain Brake

Procedure to test the functionality of the chain brake system.

Maintenance Work

7-14. Carburetor Adjustment

8-1. Sharpening the Saw Chain

Guide to sharpening the saw chain, including when and how to do it correctly.

8-4. New Saw Chain

8-5. Cleaning the Air Filter

8-14. Periodic Maintenance and Service Guidelines

Workshop Service, Spare Parts, and Warranty

Troubleshooting