Dolmar PS-410 - Extract from the Spare Parts List

22
3
2
1
8
9
10
11
12
13
7
6
4
5
19
14
15
20
16 17 18
Extract from the spare parts list
Use only original DOLMAR parts. For repairs and replacement of other parts, see
your DOLMAR service centre.
PS-410
PS-411
Accessories (not delivered with the chain saw)
14 953 100 090 1 Chain gauge
15 953 004 010 1 File handle
16 953 003 070 1 Round le, dia. 4.8 mm
953 003 100 1 Round le, dia. 4.5 mm
17 953 003 060 1 Flat le
18 953 030 030 1 File holder
(with 4.8 mm dia. round le)
953 030 020 1 File holder
(with 4.5 mm dia. round le)
19 944 340 001 1 Carburetor screwdriver
20 950 233 210 1 Tachometer
‑ 028 173 141 1 Air lter (Robkoock)
‑ 949 000 035 1 Combined can
(for 5l fuel, 2.5l oil)
Pos. DOLMAR-No. Qty. Denomination
1 414 033 141 1 Sprocket nose bar .325”, .050”, 33 cm
1 414 038 141 1 Sprocket nose bar .325”,
.050”, 38 cm
2 512 484 056 1 Saw chain .325”,
.050” for 33 cm
2 512 484 064 1 Saw chain .325”,
.050” for 38 cm
3 952 100 133 1 Chain protection for 30‑40 cm
4 028 213 100 1 Sprocket guard, cpl.
5 923 208 004 1 Hexagonal nut M8
6 941 716 131 1 Universal wrench SW 13/16
7 963 601 120 1 Suction head
8 965 603 018 1 Spark plug
9 028 173 041 1 Air lter
10 010 114 050 1 Fuel tank cap, cpl.
11 963 228 030 1 O‑Ring 28x3 mm
12 965 450 040 1 Oil tank cap, cpl.
13 963 100 041 1 Gasket