8
4) Washing
① don’t operate till wash temperature 50~60℃.
② turn on start switch.
Automatic: automatic wash water sprayed on rack loading
Manual: wash water sprayed continuously
③ check pump working and its noise.
④ check conveyor and emergency switch.
⑤ check rinse aid and detergent.
⑥ load the rack into inlet smoothly.
⑦ press emergency button when machine malfunctions.
5) Check after work
① check no dishes inside of dishwasher.
② turn off the power switch if finished up the work.
③ open drain valve for draining.
④ take food stuffs off out of strainer.
⑤ clean the inside of dishwasher.
⑥ close all valves.
6) Usage of Speed controller (GUD-C)
① press “mode” button twice with switch on.
② set the speed with ▲ or ▼ button.
③ the speed will be set after 10 sec. if no changing.
To Next Page
Loading...
