Installation of the mounting frame on the wall with and without
surface-mounting frame
You can install the devices on a switch box or with one or more surface-
mounting frames. A switch box and surface-mounting frame are not
included in the scope of supply. The installation of the devices and the
housing cover are identical on a switch box and one or more surface-
mounting frames.
Installation of the mounting frame on the wall with and without
surface-mounting frame
Risk of injury through electric current when drilling into a live
cable.
Make sure you do not drill into any live cables when drilling
holes.
Before any drilling work, use a cable detector to find any
cables in the wall.
Risk of eye injuries through drilling dust.
Wear safety goggles.
Use equipment to extract the drilling dust.
Risk of finger or hand injuries caused by slipping during
drilling or screwing work.
Wear suitable safety gloves.
Observe and follow the notices provided in the drilling
machine documentation when drilling.
To Next Page
Loading...