3
Before installing the unit over the square hole, clean the roof around the hole
to remove any grease etc. See Fig 4.
Fig 4
Take the sealing gasket and strip off the backing to expose the self adhesive side.
Lay the gasket over the hole and press down firmly.
Apply silicone sealant around the outside edge of the gasket, and now the
aircondioner is ready for installation over the hole. See fig . 5
Lift the unit over the hole and manipulate it so the hold down bolt holes are
sighted in each corner of the square hole.
Fig 5
More information https://www.caravansplus.com.au
To Next Page
Loading...
