Dometic AIRCOMMAND IBIS User Manual

1
\
INSTALLATION INSTRUCTIONS AIRCOMMAND IBIS
ROOFTOP AIRCONDITIONER
Suitability:
The IBIS caravan rooftop aircondioner is suitable for installation on caravans
and motorhomes provided the roof structure is suitable and the installed position
allows for reasonable air circulation within the van.
A central installed position is recommended to allow for even air distribution
throughout the van. In difficult positions the airdistribution plenum may be set at right
angles to the fore/aft direction of the van
Fig 1
The installed weight of a unit is 46 KG and the roof structure must be strong enough
to carry this load. If in doubt always use an “H” frame to spread the load out to the
walls. See Figs. 1 & 2 for details.
More information https://www.caravansplus.com.au

Dometic AIRCOMMAND IBIS Specifications

General

Model	AIRCOMMAND IBIS
Power Consumption (Heating)	0.95 kW
Refrigerant	R410A
Number of Fan Speeds	3
Airflow	400 m³/h
Air Flow (High)	400 m³/h
Noise Level (Indoor Unit)	48 dB
Weight (Indoor Unit)	12 kg
Dimensions (Indoor Unit)	780 x 250 x 300 mm

Summary

Air Conditioner Suitability

Air Conditioner Installation and Mounting

Mounting Requirements and Hole Preparation

Unit leveling, power requirements, and cutting the 356mm square mounting hole.

Roof Preparation and Sealing

Cleaning the roof, applying gasket, and sealant for a weather-tight seal.

Securing the Unit

Bolting down the unit using clamp bars and threaded rods at 45 degrees.

Electrical and Duct Connections

Connecting the power supply and attaching the duct assembly.

Facia and Internal Duct Fitting

Installing the internal facia and securing it to the ductwork.

Unit Commissioning and Operation

Initial Power-Up and Controls

Turning on the circuit breaker and operating basic controls.

Mode and Fan Speed Selection

Selecting cooling, dry, heat, or fan modes and adjusting fan speed.

Advanced Operation Features

Using DRY, SLEEP, TIMER functions and locking/unlocking controls.

Remote Handpiece Operation