To Next PageTo Next PageWhat does it mean when my Dometic Air Conditioner displays 'Max. filling time exceeded! Continue?'?
If the Dometic Air Conditioner displays 'Max. filling time exceeded! Continue?' during the filling process, it means the set amount of refrigerant cannot be filled. Check that AirConServiceCenter connections are not blocked.
Why Dometic Air Conditioner displays 'Not enough UV. Add.' message?
The Dometic Air Conditioner displays 'Not enough UV. Add.' during the filling process if there is not enough UV additive in the container to finish the process. You should fill the UV additive container. For ASC1000 models, make sure the scales and container can move freely.
What to do when Dometic AirCon ASC 1000 displays 'Not enough oil. Add.'?
If the Dometic Air Conditioner displays 'Not enough oil. Add.' during the filling process, it means there is not enough fresh oil in the container to finish the process. You should top up the fresh oil container with a suitable oil type. For ASC1000 models, ensure the scales and container can move freely.
Why does my Dometic Air Conditioner show 'Warning ! Not enough vacuum for injection!'?
The Dometic Air Conditioner displays 'Warning ! Not enough vacuum for injection!' during the filling phase because the vacuum in the air conditioning system is insufficient to end the process. Check the air conditioning system or the connections between it and the AirConServiceCenter for leaks.
What does it mean when my Dometic AirCon ASC 1000 Air Conditioner displays 'Not enough refrigerant. Add.'?
When the Dometic Air Conditioner displays 'Not enough refrigerant. Add.', it means that there is not enough refrigerant in the internal container to complete the process. To fix this, fill the refrigerant container.
Why does my Dometic AirCon ASC 1000 display 'Ext. tank empty or closed valve! Check!'?
The Dometic Air Conditioner displays 'Ext. tank empty or closed valve! Check!' because the set refrigerant quantity cannot be attained at the start or during the filling of the internal refrigerant container. Check if the external refrigerant container still contains enough refrigerant or if the valves of the external refrigerant container are open.
What to do if my Dometic AirCon ASC 1000 Air Conditioner displays 'A/C system leakage! Continue?'
If the Dometic Air Conditioner displays 'A/C system leakage! Continue?', it indicates a vacuum loss of more than 120 mbar during the checking time at the end of the vacuum process. You should check the air conditioning system or the connections between it and the AirConServiceCenter for leaks.
General| Power consumption | 1.05 kW |
|---|---|
| Cooling capacity | 1000 W |
| Airflow | 350 m³/h |
| Voltage | 230 V |
| Frequency | 50 Hz |
| Dimensions (H x W x D) | 285 mm |
Provides essential safety guidelines for operating the AirCon Service Center and handling refrigerants.
Highlights specific warnings and precautions related to the AirCon Service Center's operation and maintenance.
Provides step-by-step instructions for initial setup, placement, and powering on the AirCon Service Center.
Details the process of filling the internal container with refrigerant from an external tank.
Describes the fully automatic air conditioning service process initiated via the 'Short selection' menu.
Explains the step-by-step A/C servicing process allowing individual procedure selection and value input.
Guides through the process of flushing the A/C system, suitable for replacing oil or removing residue.
Procedure for resetting the zero point of the scales for accurate measurement of oils and UV additive.
Step-by-step guide for replacing the internal filter cartridge of the AirCon Service Center.
Details the requirement and procedure for calibrating the pressure transducer for accurate readings.
