To Next PageTo Next PageWhat does it mean when my Dometic AirCon ASC 2000 Air Conditioner displays 'Max. filling time exceeded! Continue?'?
If the Dometic Air Conditioner displays 'Max. filling time exceeded! Continue?' during the filling process, it means the set amount of refrigerant cannot be filled. Check that AirConServiceCenter connections are not blocked.
Why Dometic AirCon ASC 2000 Air Conditioner displays 'Not enough UV. Add.' message?
The Dometic Air Conditioner displays 'Not enough UV. Add.' during the filling process if there is not enough UV additive in the container to finish the process. You should fill the UV additive container. For ASC1000 models, make sure the scales and container can move freely.
What to do when Dometic Air Conditioner displays 'Not enough oil. Add.'?
If the Dometic Air Conditioner displays 'Not enough oil. Add.' during the filling process, it means there is not enough fresh oil in the container to finish the process. You should top up the fresh oil container with a suitable oil type. For ASC1000 models, ensure the scales and container can move freely.
Why does my Dometic AirCon ASC 2000 show 'Warning ! Not enough vacuum for injection!'?
The Dometic Air Conditioner displays 'Warning ! Not enough vacuum for injection!' during the filling phase because the vacuum in the air conditioning system is insufficient to end the process. Check the air conditioning system or the connections between it and the AirConServiceCenter for leaks.
What does it mean when my Dometic AirCon ASC 2000 Air Conditioner displays 'Not enough refrigerant. Add.'?
When the Dometic Air Conditioner displays 'Not enough refrigerant. Add.', it means that there is not enough refrigerant in the internal container to complete the process. To fix this, fill the refrigerant container.
Why does my Dometic AirCon ASC 2000 Air Conditioner display 'Ext. tank empty or closed valve! Check!'?
The Dometic Air Conditioner displays 'Ext. tank empty or closed valve! Check!' because the set refrigerant quantity cannot be attained at the start or during the filling of the internal refrigerant container. Check if the external refrigerant container still contains enough refrigerant or if the valves of the external refrigerant container are open.
What to do if my Dometic AirCon ASC 2000 displays 'A/C system leakage! Continue?'
If the Dometic Air Conditioner displays 'A/C system leakage! Continue?', it indicates a vacuum loss of more than 120 mbar during the checking time at the end of the vacuum process. You should check the air conditioning system or the connections between it and the AirConServiceCenter for leaks.
General| Brand | Dometic |
|---|---|
| Model | AirCon ASC 2000 |
| Category | Air Conditioner |
| Language | English |
Provides essential safety guidelines and precautions for operating the AirCon Service Center safely.
Highlights specific warnings and symbols related to the device's operation and potential hazards.
Explains the built-in safety mechanisms like pressure monitors and relief valves for user protection.
Guides users through the initial physical setup and power-on procedure for the AirCon Service Center.
Provides instructions for the initial filling of the internal refrigerant container from an external tank.
Introduces the fully automatic service mode, detailing the sequence of actions performed.
Describes the menu for step-by-step servicing, allowing process selection and customization.
Instructions for flushing the system, suitable for replacing oil or removing residue.
Guides on regularly checking and resetting scale zero points for accurate measurements.
