Dometic CFX 100W - Page 16

EN
Operation CFX100W
16
Using supplied DC connection cable
A
➤ Before starting up the device for the first time, check whether the operating
voltage and the battery voltage correspond (see type plate).
➤ Plug the DC connection cable (fig. 1 2, page 7) into the DC voltage socket of
the cooler (fig. 4 5, page 11).
➤ Connect the red cable to the positive (+) battery terminal.
➤ Connect the black cable to the negative (–) battery terminal.
NOTICE! Danger of damage!
For protection of the device the DC cable supplied is fitted with a fuse.
Do not remove the fuse.
Only use the DC cable supplied.
rd
bk
15A
1.
2.
8
CFX-100W--O-EN-AUS.book Seite 16 Donnerstag, 13. Juli 2017 10:12 10