CFX100W Operation
17
Extended DC hard-wiring
A
➤ Determine the required cross section of extended wiring in relation to the total
length from cooler to battery supply according to fig. 9.
A
NOTICE! Danger of damage!
To avoid drops in voltage and therefore performance, keep the cable as
short as possible and only disconnect it when necessary.
For this reason avoid additional switches, plugs or power strips.
Co-ordinate axis Meaning Unit
l Cable length m
∅ Cable cross section mm²
NOTICE! Danger of damage!
• For protection of the device the DC cable supplied is fitted with a
fuse. Do not remove the fuse.
Only use the DC cable supplied from the cooler to in-vehicle
connection point.
• Make sure that the polarity is correct.
0
0
2
6
10
14
246810121416182022242628
24 V
l/m
Ø/mm²
12 V
CFX-100W--O-EN-AUS.book Seite 17 Donnerstag, 13. Juli 2017 10:12 10
To Next Page
Loading...
