DSP-EM Scope of delivery
9
3Scope of delivery
4 Accessories
Available as accessories (not included in the scope of delivery):
5Intended use
!
DSP-EM is used for controlling, setting and the status display of devices that are connected to the
CI bus.
A connected MCA battery charger and the following inverters can be operated remotely with this:
• DSP1312T, DSP1812T, DSP2312T, DSP3512T, DSP1324T, DSP1824T, DSP2324T,
DSP3524T
The DSP-EM is the energy monitor for a connected battery sensor of the MCA-HS1 Hella sensor
type.
With an IBS multiplexer, up to four battery sensors can be connected. If no inverter is connected,
an IBS multiplexer is required for the energy supply.
Item in
fig. 1,
page 3
Quantity Description
11Display
21Connection cable
3 4 Fastening screws
4 1 Drill template
Description Ref. no.
Battery sensor, MCA-HS1 Hella sensor 9102500038
IBS multiplexer 9600002566
WARNING!
Also observe the instructions in the operating manuals of the connected devices.
'63(0,2VERRN6HLWH'LHQVWDJ0DL
To Next Page
Loading...
Need help?
General
