Operating the roof air conditioner FreshLight
26
9.6 Selecting the blower setting manually
The blower controls the strength of the air supply.
In the “Cooling” ( ), “Heating” ( ) and “Circulated air”( ) modes, the blower
levels can be selected manually. In the other air conditioning modes, the roof air
conditioner controls the blower level automatically.
➤ Use the button to select the desired blower level.
✓ The roof air conditioner confirms the receipt of the values with a high note.
✓ The new blower level has been set.
9.7 Setting the temperature
In the “Automatic” ( ), “Cooling” ( ), “Heating” ( ) and “Dehumidifying” ( )
modes, you can specify a temperature between 16 °C and 31 °C via the remote
control.
➤ Use the + or – button to select the desired temperature.
✓ The roof air conditioner confirms the receipt of the values with a high note.
✓ The temperature is set on the roof air conditioner.
Display message Explanation
Low blower level
Medium blower level
High blower level
Highest blower level
Automatic mode, only available in the “Cooling” ( ) and
“Heating” ( ) air conditioning modes.
To Next Page