[page 14] | gopowersolar.com
4.3 STATUS PARAMETERS
The status menu is entered by the controller at power-up. It is used to display key parameters as well as warnings and faults. Three displays are
automatically scrolled through as shown below. The up ▲ and down ▼ keys can also be used to manually scroll through these. This auto scroll can
be disabled using option #5 in the settings menu.
The rst display shows battery voltage and current. The second shows solar open circuit voltage. The third shows the controller temperature.
OPERATION
When the charging is disabled through the settings, the solar voltage display will show the following menu display to indicate this was set inten-
tionally by the user.
To Next Page
Loading...
