To Next PageTo Next Page
Need help?Do you have a question about the Dometic Go Power! GP-PWM-30-SB and is the answer not in the manual?
General| Brand | Dometic |
|---|---|
| Model | Go Power! GP-PWM-30-SB |
| Category | Controller |
| Language | English |
Provides a general overview of the solar controller's purpose and function in a photovoltaic system.
Details the nominal system voltage and current ratings for the GP-PWM-10-FM and GP-PWM-30-SB models.
Specifies the types of batteries compatible with the GP-PWM-30-SB, including lead-acid and lithium variants.
Explains the automatic shutdown of the USB output port to protect the battery from over-discharge.
Lists regulatory compliance marks such as CE and RoHS for the solar controller.
Provides detailed technical specifications including voltage, current, dimensions, weight, and features.
Describes the controller's behavior upon powering up and how system voltage affects initial charge stages.
Guides users on how to select and confirm the appropriate battery charging profile for different battery types.
Details the specific charge voltages and times for different battery types like Sealed/Gel, AGM, Flooded, and LFP.
Explains how to cycle through display modes to view battery voltage, current, state of charge, and ampere hours.
Instructions on how to reset the cumulative ampere hours charged counter to zero.
Details error states like Over Voltage and Low Voltage, including display indicators and controller behavior.
Covers troubleshooting for blank display readings and nighttime display issues.
Addresses issues related to inaccurate voltage readings and potential voltage drops in the system.
Helps diagnose issues with zero or less-than-expected current readings from the solar array.
Explains causes and solutions for controller flashing, often related to high voltage or insufficient battery capacity.
Provides instructions on how to obtain support, troubleshoot further, or return a defective product.
