Need help?Do you have a question about the Dometic Go Power! 30 AMP RVC MPPT and is the answer not in the manual?
General| Battery Voltage Range | 8V – 32V |
|---|---|
| Max Charge Current | 30A |
| Max Panel Input Voltage | 100Voc |
| Max PV Power Input | 600W@12V / 1200W@24V |
| Conversion Efficiency | ≤98% |
| MPPT Tracking Efficiency | >99% |
| No-Load Loss | <10mA |
| Grounding | Negative |
| Max Wire Gauge | 8 AWG |
| Operating Temperature | -35 to 45°C |
| Storage Temperature | -35 to 75°C |
| Humidity | 95% N.C. |
| Water Ingress Protection | IP32 |
| Altitude | < 3000m |
| Battery Type | Lead Acid (AGM, GEL, Flooded), LiFePO4 |
| Protection | Solar/battery reverse polarity Solar/battery over voltage Solar/battery short circuit Over temperature |
Weight and Dimensions| Dimensions (H x W x D) | 3.15” x 7.78” x 5.5” |
|---|---|
| Weight | 3.14lbs (1.42kg) |
Covers general safety guidelines, warnings, and precautions for operating the controller.
Details specific safety measures for solar array connections, battery handling, and potential hazards.
Provides an overview of the 30A RV-C MPPT solar controller's functionality and purpose.
Lists the key features and advanced capabilities of the solar controller, including MPPT and dual-battery management.
Identifies and describes the front and side view components of the solar controller.
Explains MPPT technology and its benefits for solar charging efficiency.
Details how sunlight, temperature, and shading affect MPPT performance and I-V curves.
Details the Bulk, Absorption, and Float charging stages, explaining their purpose and operation.
Explains the Equalize and Recharge charging stages, including safety warnings.
Provides charging parameters for different battery types (Gel, AGM, Flooded, LiFePO4, Custom).
Explains the wiring for dual battery systems and the charging prioritization logic.
Provides detailed physical dimensions of the solar controller for installation and mounting purposes.
Lists key technical specifications including voltage, current, efficiency, operating conditions, and protection features.
Explains the status indicated by the PV LED pattern during charging and night/day modes.
Details the status indicated by the Battery LEDs for battery conditions like no battery or over-discharge.
Lists the necessary tools and materials required for installing the solar controller.
Provides step-by-step instructions for choosing a location, marking, and mounting the controller.
Details the wiring sequence, recommended wire gauges, and safety precautions for connections.
Explains how to identify the RV-C instance number using the controller's LEDs.
Provides steps to configure the RV-C instance number using the SET button and LEDs.
Describes the features and capabilities of the Bluetooth-enabled GP-RVC-R remote display.
Outlines the five-year warranty period and conditions that may void the warranty.
Provides guidance on troubleshooting, contacting support, and returning defective products.
To Next Page