Dometic MD310 - Using the Safe; Operating Functions for Guests

EN
Using the safe MD310, MD390, MD450
10
8 Using the safe
8.1 Operating functions for guests
Closing the safe
➤ Enter a four digit code.
➤ Press the CLOSE button.
✓ The display shows the message CLOSED.
Opening the safe
➤ Enter the correct four digit code.
✓ The code entered is shown in the display.
✓ The safe will open.
✓ The display shows the message OPEN.
I
NOTE
If an incorrect code is entered, the message E-CODE appears on the
display.
After five incorrect attempts, the safe lock will remain blocked for
15 minutes and no further entries are possible. As soon as a button is
pressed, the message HOLD15 appears on the display.
PIN 4X
CLOSE
PIN 4X
XSafe-MB.book Seite 10 Freitag, 16. September 2016 1:53 13