Dometic MDD 403 - Using the Safe; Operating Functions for Guests; Emergency Opening with Master Code

EN
Using the safe MDD403
10
8 Using the safe
8.1 Operating functions for guests
Closing the safe
➤ Enter a four digit code.
➤ Press the CLOSE button.
✓ CLOSED appears on the display.
Opening the safe
➤ Enter the correct four digit code.
✓ The code entered is shown in the display.
✓ The safe will open.
✓ OPEN appears on the display.
I
8.2 Emergency opening using master code
The master code is necessary if guests have left the safe locked or have forgotten
their code.
NOTE
If an incorrect code is entered, the message ERROR appears on the dis-
play.
After five incorrect attempts, the safe will remain blocked for six minutes
and no further entries are possible. As soon as a button is pressed, the
message ERROR5 appears on the display.
PIN 4X
CLOSE
PIN 4X
0'',2VERRN6HLWH'RQQHUVWDJ)HEUXDU