Dometic MDD 403 - Page 11

EN
MDD403 Using the safe
11
Opening safe with the master code
➤ Press the ENTER button twice.
➤ Enter the correct six digit master code.
➤ Press the ENTER button.
✓ The display shows the message DELAY. The door opens automatically after ten
seconds.
Changing the master code
A
You can change the factory-set master code (210104). The safe must be locked for
this.
NOTICE!

If you forget your master code, nobody can access the safe any
more (not even the manufacturer). No resetting, or similar action, is
possible.

Therefore note down the master code and store it very carefully in a
safe location.

The safe has a factory-set master code. Change this code for security
reasons.
ENTERENTER
PIN 6X
ENTER
DELAY
CURRENT
PIN 6X
ENTER
NEW
PIN 6X
ENTER
ENTER
NEW
PIN 6X
ENTER
ENTER
REPEAT
ENTER2X
0'',2VERRN6HLWH'RQQHUVWDJ)HEUXDU