Dometic MDD 403 - Page 13

EN
MDD403 Using the safe
13
➤ Enter the six digit R.E.O.S. code.
I
➤ Press the ENTER button.
✓ After five seconds, a ten digit alphanumeric code will be shown on the display.
I
➤ Go to the www.sam.dometic.com page on the internet.
➤ Enter your login data.
➤ Select R.E.O.S. code from the menu.
➤ Enter the number of the safe (e.g. room number) and the ten digit alphanumeric
code.
➤ Click Get code.
✓ A new code will be displayed for one minute.
NOTE
You can change the factory-set R.E.O.S. code (210104) (see chapter
“Changing R.E.O.S. code” on page 14).
NOTE
The alphanumeric code will be shown in two parts.
Example: 52115 – Ab271.
0'',2VERRN6HLWH'RQQHUVWDJ)HEUXDU