Dometic MDD 403 - Anti-Tamper System Management

EN
MDD403 Using the safe
19
➤ Click the link.
✓ The stored reports are displayed.
➤ Click the requested line to generate a print view for each audit report.
8.6 Emergency opening using the anti-tamper system
(security against manipulation) (optional)
If an anti-tamper system (security against manipulation) is activated on the safe this
blocks the safe as soon as the master key (optional) is used or the cover of the lock
mechanism is removed (optional) (e.g. also when the battery is replaced).
0'',2VERRN6HLWH'RQQHUVWDJ)HEUXDU