Dometic MDD 403 - Page 23

EN
MDD403 Using the safe
23
✓ The display shows an alphanumeric code in two parts
(e.g. 52115 – Ab271).
➤ Note down the code.
➤ Reattach the cover.
➤ Go to the www.sam.dometic.com page on the internet.
➤ Enter your login data.
➤ Select AT Sensor from the menu.
➤ Enter the room number and the alphanumeric code (e.g. 52115Ab271) and click
Get code.
✓ A new anti-tamper code (e.g. 056058) is displayed for one minute.
➤ Note down the code.
To deactivate the anti-tamper code, a new anti-tamper code must be entered:
➤ Press the ENTER button twice.
ENTERENTER
PIN 6X
ENTER
DELAY
OPEN
0'',2VERRN6HLWH'RQQHUVWDJ)HEUXDU