Installing the device PI8022, PI8023, MO9722
16
6.3 Connecting the device to the gas supply
!
You must use a rigid gas line for the connection.
Observe the following instructions for the connection:
• Observe the national requirements.
• Fasten the gas line to the side or rear wall of the surrounding furniture parts so that
no loads are placed on the actuators.
• The entire gas line must be free of stress.
WARNING! Beware of injury!
Only use LP gas cylinders with a certified pressure regulator. Compare
the pressure information on the type plate with the pressure information
on the regulator.
To Next Page
Loading...
