Dometic POWER AWNING PRO - Wiring Diagrams

5
EN
Wireless Remote Control/Receiver & Wind Sensor Wiring Diagrams
3.2 Components
For the awning remote control to communicate with
the wireless receiver, it must be within the specified
transmission distance.
I
Effective transmitting distance may be affected by
actual environment.
q
w
e
1 Remote Control, Receiver, and Wind Sensor
q
Remote Control
e
Wind Sensor (Option)
w
Receiver
4 Wiring Diagrams
4.1 Compatibility
This product is compatible with the following models or
series and associated hardware.
Compatible Power Awnings
9100 9200 9500
4.2 Specifications
This section describes the breakdown of the model
identification numbers.
Voltage
12V
Emission Frequency
433.92MHz
Maximum Power Load for Motor
180W
Maximum Power Load for Light
30W
4.3 Receiver Control Range
For the awning remote control to communicate with
the wireless receiver, it must be within the specified
transmission distance.
I
Effective transmitting distance may be affected by
actual environment.
q
w
2 Remote Control Transmission Distances
q
Unobstructed
656  (200 m)
w
Concrete Obstruction
115  (35 m)
5 Wiring Diagrams

WARNING: ELECTRIC SHOCK HAZARD.
Turn the power off before performing any electrical
installation or maintenance activities. Failure to
obey this warning could result in death or serious
injury.
This section shows examples of the product wiring.