Dometic ProSafe MD283 - Display Messages

EN
Display messages proSafe
28
10 Display messages
Display Sound
Press CLOSE CODE 2 short beeps
Press ENTER 3 short beeps
Press 0 – 9 0-9 1 short beep
Key in guest code OPEN
Error in locking mechanism ERROR 2 4 long beeps
Incorrect sequence ERROR 1 long beep
System check 888888
Wait when opening with master
code
DELAY
Repeat master code REPEAT
Low battery detected BAT-LO 2 long beeps.
After changing: 2 short beeps
Error entering code ERROR 1 long beep
5 x error entering code ERROR 5 3 long beeps
Programming error ERROR 1 long beep
Enter date DATE
Enter time HOUR
Enter room number ROOM
Blocked owing to 20 events in 10
minutes
ERROR B 3 long beeps
SD card transfer in progress CSD25
End of SD card transfer DSDXX 3 short beeps
Wait when opening with R.E.O.S.
code
DELAY
Repeat R.E.O.S. code REPEAT
Safe blocked due to back cover
secured with anti-tamper code
A-001 3 short beeps
MD-IO-16s.book Seite 28 Freitag, 4. August 2017 9:25 09