Dometic ProSafe MD283 - Operating Functions for Guests; Closing the Safe; Opening the Safe; Operation Note

EN
proSafe Using the safe
11
8 Using the safe
8.1 Operating functions for guests
Closing the safe
➤ Enter a four digit code.
➤ Press the CLOSE button.
✓ CLOSED appears on the display.
Opening the safe
➤ Enter the correct four digit code.
✓ The code entered is shown in the display.
✓ The safe will open.
✓ OPEN appears on the display.
I
NOTE
If an incorrect code is entered, the message ERROR appears on the dis-
play.
After five incorrect attempts, the safe will remain blocked for six minutes
and no further entries are possible. As soon as a button is pressed, the
message ERROR5 appears on the display.
PIN 4X
CLOSE
PIN 4X
MD-IO-16s.book Seite 11 Freitag, 4. August 2017 9:25 09