Using the safe proSafe
12
8.2 Emergency opening using master code
The master code is necessary if guests have left the safe locked or have forgotten
their code.
Opening safe with the master code
➤ Press the ENTER button twice.
➤ Enter the correct six digit master code.
➤ Press the ENTER button.
✓ The display shows the message DELAY. The door opens automatically after ten
seconds.
Changing the master code
A
You can change the factory-set master code (210104). The safe must be locked for
this.
NOTICE!
• If you forget your master code, nobody can access the safe any
more (not even the manufacturer). No resetting, or similar action, is
possible.
• Therefore note down the master code and store it very carefully in a
safe location.
• The safe has a factory-set master code. Change this code for security
reasons.
ENTERENTER
PIN 6X
ENTER
DELAY
CURRENT
PIN 6X
ENTER
NEW
PIN 6X
ENTER
ENTER
NEW
PIN 6X
ENTER
ENTER
REPEAT
ENTER2X
MD-IO-16s.book Seite 12 Freitag, 4. August 2017 9:25 09
To Next Page
Loading...
