proSafe Using the safe
13
➤ Press the ENTER button twice.
➤ Enter the correct six digit master code.
➤ Press the ENTER button.
✓ The display shows the message DELAY.
➤ Press the ENTER button.
➤ Enter a new six digit master code within ten seconds.
➤ Press the ENTER button.
✓ The display shows the message REPEAT.
➤ Press the ENTER button.
➤ Repeat the entry of the new six digit master code within ten seconds.
➤ Press the ENTER button again.
✓ The safe confirms the change of the master code with an audio tone.
MD-IO-16s.book Seite 13 Freitag, 4. August 2017 9:25 09
To Next Page
Loading...
