SC26, SCT26, SC30, SC30B, SC38 Operation
13
6.1 Energy saving tips
• Choose a well ventilated location which is protected from direct sunlight.
• If you want to set an increased energy efficiency and a limited cooling capacity for
the cooler device, use the device’s ECO mode.
• Allow warm food to cool down first before placing it in the cooling device to
keep cool.
• Do not open the cooling device more often than necessary.
• Do not leave the cooling device open for longer than necessary.
6.2 Mounting the wheels (only SC38)
➤ Mount the wheels as shown to the cooling device (fig. 3, page 4).
6.3 Using the cooler in DC mode
I
➤ Place the device on a firm base.
➤ Connect the DC connection cable to the cigarette lighter or the DC socket in the
vehicle.
✓ The device starts cooling/heating the interior.
➤ To switch off the cooling device, disconnect the DC connection cable.
NOTE
If you connect the cooler to the cigarette lighter of your vehicle,
remember that the ignition must be turned on to supply it with power.
SC26-SCT26-SC30-SC38_OPM_EMEA16.book Seite 13 Mittwoch, 19. Juni 2019 8:51 20
To Next Page
Loading...
Need help?
General
