Dometic Smart D Operating Dometic Smart D
51
Settings menu (chapter “Settings menu” on page 59)
Here you can:
– set the brightness of the display
– set the time and date
– calibrate the tank level display
– set the time zone
– view the status of the charger
– view the status of the I/O card signals
– block the fresh water pump
– view the alarms
– select the fresh water supply intake
– set the language
Changing values
Target values can be set in some menus. For every value that can be set,
there is a corresponding pair of “+” and “–” buttons.
➤ To increase values, press the “+” button.
➤ To reduce values, press the “–” button.
✓ The value set is displayed automatically.
Changing languages (fig. k, page 11)
➤ Press the button to open the settings menu.
➤ Press the button to open the language menu.
➤ Press on the flag for the language required.
➤ Press the button to return to the main menu.
To Next Page
Loading...
