Dometic Standard MD310 - Emergency opening with the master key

EN
Emergency opening using master code MD310, MD390, MD450
10
➤ Enter the correct six digit master code.
➤ Press the CLEAR button.
✓ The display shows the message NEW.
➤ Enter a new six digit master code.
➤ Press the CLOSE button.
✓ The display shows the message AGAIN.
➤ Repeat the entry of the new six digit master code.
➤ Press the CLOSE button again.
✓ The safe confirms the change of the master code with the message DONE.
9.1 Emergency opening with the master key
A
The safe lock can be opened in all eventualities with the master key, even in the event
of an electronic fault.
Opening the safe with the master key
➤ Slide the plastic cover which covers the key hole (fig. 1 5, page 2).
➤ Put the master key into the key hole.
NOTICE!
No unauthorised persons should have access to the master key.
Store the master key very carefully in a safe location.
PIN 6X
PIN 6X
CLEAR
NEW
PIN 6X
AGAIN
CLOSE
CLOSE
XSafe-IO.book Seite 10 Dienstag, 13. August 2019 2:03 14