Dometic Standard MD310 - Using the safe; Operating functions for guests

EN
Using the safe MD310, MD390, MD450
8
Drilling on the underside (fig. 3, page 2)
➤ Pre-drill the hole in the mounting location (e.g. in the wall or cupboard).
➤ Attach the safe with a suitable fastening material.
8 Using the safe
8.1 Operating functions for guests
Closing the safe
➤ Enter a four digit code.
➤ Press the CLOSE button.
✓ The display shows the message CLOSED.
Opening the safe
➤ Enter the correct four digit code.
✓ The code entered is shown in the display.
✓ The safe will open.
✓ The display shows the message OPEN.
Model MD450 MD390 MD310
L1 120 mm 90 mm 50 mm
L2 210 mm 210 mm 210 mm
P 200 mm 235 mm 120 mm
PIN 4X
CLOSE
PIN 4X
XSafe-IO.book Seite 8 Dienstag, 13. August 2019 2:03 14