Dometic Standard MD310 - Emergency opening using master code; Opening safe with the master code; Changing the master code

EN
MD310, MD390, MD450 Emergency opening using master code
9
I
9 Emergency opening using master code
The master code is necessary if guests have left the safe locked or have forgotten
their code.
Opening safe with the master code
➤ Enter the correct six digit master code.
✓ The display shows the message OPEN.
✓ The door opens.
Changing the master code
A
You can change the factory setting code (888888). The safe must be opened for
this.
NOTE
If an incorrect code is entered, the message E-CODE appears on the
display.
After five incorrect attempts, the safe lock will remain blocked for
15 minutes and no further entries are possible. As soon as a button is
pressed, the message HOLD15 appears on the display.
NOTICE!
•
If you forget your master code, nobody can access the safe any more
(not even the manufacturer). No resetting, or similar action, is
possible.
•
Therefore note down the master code and store it very carefully in a
safe location.
•
The safe has a factory setting code. We strongly recommend that you
change this code for security reasons.
PIN 6X
XSafe-IO.book Seite 9 Dienstag, 13. August 2019 2:03 14