TEC29 EV AUS Safety instructions
19
2.3 Handling electrical cables
!
WARNING!
The electrical power supply may only be connected by a
qualified electrician.
!
CAUTION!
Attach and lay the cables so that they cannot be tripped over or
damaged. All the wiring must comply to AS3000 and AS3001.
A
NOTICE!
Use cable ducts to lay cables through walls with sharp edges.
Do not lay loose or bent cables next to electrically conductive
materials (metal).
Do not pull on the cables.
2.4 Operating the device safely
!
WARNING!
Always disconnect the power supply when working on the
device.
A
NOTICE!
Only operate the device if you are certain that the housing and
the cables are undamaged.
To Next Page
Loading...
