Dometic TEC29 EV AUS - Technical Description

EN
Technical description TEC29 EV AUS
22
7 Technical description
The TEC29 EV AUS generator consists of the following main parts (fig. 2,
page 3):
 Combustion engine (1)
 Alternator (2) with permanent magnets
 Stepper motor (3)
 Inverter (4)
 Internal control panel (5)
 Remote control (6)
The combustion engine (1) drives the alternator (2) connected to it, which in
turn generates AC voltage.
The inverter (4) transforms this AC voltage into a stable voltage of 230 V and
50 Hz.
The terminals, the socket for the connection cable to the digital control
panel (6) and the main switch are installed in the internal control panel (5).
The generator has the following features:
 Automatic mode for charging the connected battery automatically (must
be configured accordingly when installed, see chapter “Configuring the
automatic mode” on page 31)
Control elements in the control panel
The control panel is located on the generator behind the cover.
No. in
fig. 3,
page 4
Description
1 Main switch Switches the generator to standby or no
function.