TEC29, TEC29LPG Intended use
15
6 Intended use
The TEC29 (reference no. 9102900200) and TEC29LPG (reference no.
9102900179) generators are designed for use in motor homes, camper vans and
vehicles for commercial use.
The generator is not suitable for installation in water vessels.
The generator produces a pure sine wave voltage of 230 V/50 Hz which can be con-
nected to the consumer with a total continuous load of 2600 W. The power quality
is also suitable for sensitive consumers (such as PCs).
The generator can charge a 12 V battery.
7 Technical description
The TEC29 and TEC29LPG generators consist of the following main parts (fig. 1,
page 3):
• Combustion engine (1)
• Alternator (2) with permanent magnets
• Inverter (3)
• Internal control panel (4)
• Remote control (5)
The combustion engine (1) drives the alternator (2) connected to it, which in turn
generates AC voltage.
The inverter (3) transforms this AC voltage into a stable voltage of 230 V and 50 Hz.
The terminals, the socket for the connection cable to the remote control (5) and the
main switch are installed in the internal control panel (4).
Overview of the components:
• TEC29: fig. 0, page 8.
• TEC29LPG: fig. a, page 9
The generator has the following features:
• Integrated battery charger for charging the connected battery
• Automatic mode for charging the connected battery automatically (must be con-
figured accordingly when installed)
TEC29-B-16s.book Seite 15 Donnerstag, 21. Juli 2016 8:09 08
To Next Page
Loading...
Need help?
General