To Next PageTo Next Page
Need help?Do you have a question about the Dometic TEC29 and is the answer not in the manual?
General| Dimensions | 428 x 246 x 103 mm |
|---|---|
| Weight | 6.8 kg |
| Output Voltage | 230V |
| Input Voltage | 12V DC |
| Frequency | 50 Hz |
| Protection | Overload, Overheating, Short Circuit |
Detailed safety instructions and warnings for operating the generator, including precautions against hazards.
Guidelines for safely operating the generator, including precautions for electrical safety and handling.
Description of the main switch and fuses located on the generator's control panel.
Details about the display, on/off switch, start button, and gauges on the remote control unit.
Key operational advice, including run-in phase, oil level checks, and gas leak checks.
Instructions on how to put the generator into standby mode or turn it off using the main switch.
Steps to activate or deactivate the remote control unit for generator operation.
Procedure for starting the generator, including conditions and using the start button.
Instructions for safely stopping the generator using the on/off switch or main switch.
Explanation of various messages displayed by the generator and their corresponding meanings.
Detailed guide for checking the engine oil level, including safety precautions and required tools.
Instructions on how to activate and use the automatic mode for battery charging.
Procedure for deactivating the automatic mode, either via the switch or by turning on the ignition.
A schedule detailing required maintenance tasks, intervals, and inspections for the generator.
Important safety precautions and steps to take before performing any maintenance on the generator.
Steps to correctly reconnect and prepare the generator after maintenance has been completed.
Detailed procedure for draining old oil and refilling with new oil, including oil type recommendations.
Instructions for cleaning and maintaining the generator's air filter, including warnings about its importance.
Procedure for inspecting, cleaning, measuring gap, and replacing spark plugs for optimal engine performance.
