What to do if there is matter in the jets of Domino C16 Printer?
If you find matter in the jets of your Domino Printer, it's probably because the ink filter has failed. The ink filter should be replaced immediately.
What to do if Domino Printer has a total loss of ink to all jets?
If your Domino Printer experiences a total loss of ink to all jets, there could be several reasons: * **Air pump failure:** Check the mains input, ensure the ON/OFF switch is illuminated, and verify the LCD screen displays information. * **Electronic problem in the print head:** Listen for the sound of valves firing to determine if this is the cause. * **Incorrect setup parameters:** Verify all setup parameters, especially the dot size value.
How to fix drooling in Domino Printer?
If your Domino Printer is drooling, it's likely due to: * **Build-up of contaminants on the nozzle plate:** Clean the nozzle plate with Domino nozzle cleaner and a soft, lint-free cloth. * Perform a purge.
How to fix feathering in Domino C16?
If your Domino Printer is experiencing feathering, it could be due to: * **Build-up of contaminants on the nozzle plate:** Clean the nozzle plate using Domino nozzle cleaner and a soft, lint-free cloth. * Perform a purge.
Outlines fundamental safety practices for handling inks and printer operation.
Details the components and functions of the printer's base unit.
Describes the print head assembly, its interface, and key components.
Advises on optimal placement and environmental considerations for the printer.
Guides through the physical installation and mounting process of the printer.
Explains how to configure the printer's voltage for local power supply.
To Next Page
General
