What to do if there is matter in the jets of Domino Printer?
If you find matter in the jets of your Domino Printer, it's probably because the ink filter has failed. The ink filter should be replaced immediately.
What to do if Domino Printer has a total loss of ink to all jets?
If your Domino Printer experiences a total loss of ink to all jets, there could be several reasons: * **Air pump failure:** Check the mains input, ensure the ON/OFF switch is illuminated, and verify the LCD screen displays information. * **Electronic problem in the print head:** Listen for the sound of valves firing to determine if this is the cause. * **Incorrect setup parameters:** Verify all setup parameters, especially the dot size value.
How to fix drooling in Domino C Series?
If your Domino Printer is drooling, it's likely due to: * **Build-up of contaminants on the nozzle plate:** Clean the nozzle plate with Domino nozzle cleaner and a soft, lint-free cloth. * Perform a purge.
How to fix feathering in Domino Printer?
If your Domino Printer is experiencing feathering, it could be due to: * **Build-up of contaminants on the nozzle plate:** Clean the nozzle plate using Domino nozzle cleaner and a soft, lint-free cloth. * Perform a purge.
General safety information and warnings for handling inks and operating printers.
Essential safety standards and precautions for printer use and maintenance.
Guidelines for safe storage of the printer and associated materials.
Precautions and procedures related to potential fire hazards with inks.
Procedures for cleaning ink spills and disposing of waste materials safely.
Overview of Domino C-Series printers, their capabilities, and features.
Detailed explanation of the printer's internal mechanisms and operational flow.
Information on Domino's water-based inks, their properties, and applications.
Description of the printer's base unit, including ink storage and power components.
Specific details and operation of the one litre ink base unit.
Specific details and operation of the three litre ink base unit.
Description of the print head, keypad interface, and LCD display.
Guidelines and warnings for choosing a suitable location for printer installation.
Explanation of the buffer plate's purpose and its integration with the nozzle plate.
Step-by-step instructions for securely mounting the printer assembly.
Procedure to correctly set the printer's internal voltage for the power supply.
Specific instructions for installing and configuring the one litre base unit.
Specific instructions for installing and configuring the three litre base unit.
Detailed guide on how to connect the ink bottle to the printer's delivery system.
Instructions for connecting the print head's power and ink supply cables.
Procedure to remove air from the ink system after installation or ink replacement.
Process to flush and align ink jets in the print head for optimal performance.
Guide to choosing the preferred language for the printer's user interface.
Steps to enable and configure password protection for system access.
Procedure for setting the printer's internal clock for accurate date/time stamping.
Instructions on how to compose, format, and save messages for printing.
How to select and print previously created messages on demand.
Method for optimizing print clarity by adjusting the size of printed dots.
How to modify the ink density for individual lines within a message.
Setting the print rate to match conveyor speed for clear, legible output.
Controlling the time delay between product detection and ink emission.
Configuring the printer to print messages in forward or reverse direction.
Adjusting the message orientation to normal or inverted printing.
Displaying, resetting, and managing the count of printed products.
Procedure for establishing a secondary password for printer access.
Instructions for erasing all stored messages and system settings.
Using special codes and attributes to control text appearance and content.
Setting the preference for printing zeros with or without a slash.
Applying bold formatting to specific parts of a message using bracket codes.
Details on available text sizes and the formatting codes required to use them.
A reference table for standard text sizes and their corresponding start/end codes.
Implementing automatic incremental or decremental counting for products.
Configuring and integrating pallet counting into printed messages.
Procedure to define the number of boxes per pallet for counting.
Using codes to display current box and pallet counts in messages.
Using automatic attributes to print the current system date and time.
Method for calculating and printing sell-by-date information based on current date.
Setting up and incorporating shift codes for production tracking in messages.
Important general advice and precautions for printer maintenance and care.
Overview of periodic checks and cleaning procedures for optimal performance.
Daily tasks for checking ink levels, cleaning, and inspecting components.
Specific steps for preparing the printer for extended periods of non-use.
Procedures for a comprehensive six-month inspection, including part replacement.
Diagnosing and resolving issues related to ink flow, supply, and jet stream.
Step-by-step guide for clearing blocked jets using the syringe flushing method.
Ensuring correct connection of tubing to solenoid valves for proper character printing.
To Next Page
General
