What to do if there is matter in the jets of Domino C7?
If you find matter in the jets of your Domino Printer, it's probably because the ink filter has failed. The ink filter should be replaced immediately.
What to do if Domino Printer has a total loss of ink to all jets?
If your Domino Printer experiences a total loss of ink to all jets, there could be several reasons: * **Air pump failure:** Check the mains input, ensure the ON/OFF switch is illuminated, and verify the LCD screen displays information. * **Electronic problem in the print head:** Listen for the sound of valves firing to determine if this is the cause. * **Incorrect setup parameters:** Verify all setup parameters, especially the dot size value.
How to fix drooling in Domino Printer?
If your Domino Printer is drooling, it's likely due to: * **Build-up of contaminants on the nozzle plate:** Clean the nozzle plate with Domino nozzle cleaner and a soft, lint-free cloth. * Perform a purge.
How to fix feathering in Domino C7 Printer?
If your Domino Printer is experiencing feathering, it could be due to: * **Build-up of contaminants on the nozzle plate:** Clean the nozzle plate using Domino nozzle cleaner and a soft, lint-free cloth. * Perform a purge.
Instructions and warnings for setting the printer's voltage to match the local power supply.
Procedure for removing air from the ink supply system after installation or bottle replacement.
Procedure to expel trapped air and particles from the print head for optimal performance.
Procedure for setting the printer's current time, date, and rollover time.
Instructions for creating new messages, including message line limits per printer model.
Procedure for printing stored messages by entering their reference number.
How to adjust dot size for optimal print quality on specific messages or all messages.
Instructions for setting up a second, operator-defined password for enhanced security.
Procedure to clear all messages and settings from the printer's memory.
How to use automatic attributes for incremental and decremental box counting.
Explanation of how pallet counting works and its use for logging multiple product counts.
How to print box and pallet counts within messages using specific automatic attribute codes.
How to use automatic attributes to print the current system date and time.
How to print sell-by-dates using codes based on days or months from the current date.
How to program and print shift codes that automatically change with production shifts.
Procedure for clearing blocked jets using a syringe flushing method.
General| Operating Temperature | 5 - 40 °C (41 - 104 °F) |
|---|---|
| Connectivity | Ethernet, Serial |
| Operating System Compatibility | Windows |
| Maximum Print Height | 71 mm (2.8") |
| Maximum Print Width | 71 mm (2.8") |
To Next Page
