Need help?Do you have a question about the Domino Ax130i and is the answer not in the manual?
General| Print Technology | Inkjet |
|---|---|
| Maximum Print Speed | Up to 6.7 m/s (depending on print mode and resolution) |
| Barcodes | EAN 8, EAN 13, Code 39, Code 128, Interleaved 2 of 5, Datamatrix, QR Code |
| User Interface | Touchscreen |
| Operating Temperature | 5°C to 40°C |
| Print Speed | Up to 6.7 m/s |
| Connectivity | Ethernet, USB |
| Storage Temperature | -20°C to 60°C |
Defines the meaning of WARNING and CAUTION messages for potential hazards.
Explains the meaning of various safety symbols used in the documentation.
Step-by-step guide to powering on the printer.
Procedure for safely shutting down the printer.
Instructions for controlling the ink jet operation.
Steps for creating a new label from scratch.
Procedure for printing a created label.
How to move the print left or right on the horizontal axis.
How to move the print up or down on the substrate.
Instructions for replacing printer cartridges.
Detailed steps for replacing the ITM unit.
Covers hazards like pressurized systems, chemicals, and electrical safety during maintenance.
Advice on limiting nozzle unblocking wizard use to avoid ink thinning.
Steps to run the nozzle unblocking wizard via the touchscreen.
Procedure for cleaning the i-Pulse print head, including safety warnings.
Procedure for cleaning the i-Pulse2 print head, including safety warnings.
Procedure for cleaning the i-Pulse Duo print head, including safety warnings.
Procedure for cleaning the i-Pulse RS print head, including safety warnings.
Warning about disabling wake-up mode if power is disconnected.
Only trained personnel should install the printer.
Ensuring secure grounding of printer and surrounding metallic items.
Safety warnings related to electrical supply and connections.
Guidelines for power supply cable rating and fuse requirements.
Steps for preparing the print head before initial use.
Steps for installing the ITM, including references to previous sections.
Precautions for grounding equipment during ink priming.
Steps to run the ink priming wizard on the touchscreen.
To Next Page
