34 EPT034331 Issue 5 May 2021
How to Install the ITM
Note: Paper towels (or similar) and wash are required for this procedure.
Do this procedure:
• When installing the ITM for the first time.
• After a long shut down if the ITM was removed.
To install the ITM:
(1) Open the printer ink cabinet.
(2) Follow the instructions for changing an ITM from page 18, step (6) onwards.
How to Install the Ink and Make-up Cartridges
Note: Tools required: 6mm Hex Key.
(1) If the printer is not already on, press and hold the standby button for 2 seconds
to switch the printer on.
(2) Follow the procedure for changing the cartridges from page 14, step (2) onwards.
WARNING: Hazardous chemicals. Risk of skin or eye damage.
Wear protective equipment such as gloves and glasses when near the
printer. Physical contact with printer ink or make-up can cause skin or eye
damage.
CAUTION: Hazardous Chemical. Risk to the environment.
Obey local waste disposal regulations to dispose of used ITM and paper
towels.
WARNING: Hazardous chemicals. Risk of personal injury.
Wear protective equipment such as gloves and glasses when near the
printer. Physical contact with printer ink or make-up can cause skin or eye
damage.
To Next Page
Loading...
Need help?
General
