Domino C7

PROGRAMMING AND PRINTING
77091 Issue 2 November 2003 57
Press the key labelled:
The following screen will appear:
2 line LCD models:
4 line LCD models:
Enter the number (0-49) of the message to change, or press the key labelled:
to change the setting for all the messages held in the printer. Now press the
ENTER key.
If a specific message is chosen the screen will change to:
2 line LCD models:
Speed set too low
Correct speed
For which msg
(* for all)
For which message
Enter number or
press * for all...
Speed =
New value: