OPERATION
3-38 L025317 Issue 5 July 2014
• Activate the message for printing by sending it to the printer via
the File menu .
Add a New Link
To add a new link to the message:
• Press on the screen within a specific area of the Message Editor where
you require the item to appear. A cross hair will appear at this location.
• Select the Add icon.
• From the sub-menu select the Add Text icon.
• Select +Variable >+Create New > Link.
• Enter a name or use the default name for the link object
• Specify the source of the link, e.g. a counter or a clock or message
content element. System variables are entered into a message via a
link.
• Select the green tick icon to enter the offset clock into the message.
The link object will have the same content as the source object.
• Activate the message for printing by sending it to the printer via
the File menu
Add a New Script
Note: A script has to be copied to the scripts folder of the printer’s
disk to insert it into a message. This may be done via Home >
Settings > File Manager
To add a new script to the message:
• Press on the screen within a specific area of the Message Editor where
you require the item to appear. A cross hair will appear at this location.
• Select the Add icon.
• From the sub-menu select the Add Text icon.
• Select +Variable >+Create New > Script.
• Specify the source for the script and the parameters needed within the
script.
• Select the green tick icon to enter the offset clock into the message.
• Activate the message for printing by sending it to the printer via
the File menu .
To Next Page
Loading...
Need help?
General
