3. Use the Print group filter setting, to filter labels that are valid for each print group's current
configuration.
4. Locate the label and select the send to print icon:
5. Select the print groups to send the label to.
6. Select Send.
End of procedure.
START PRINTING
To start printing:
1. Select START at the top of the user interface.
2. Select which print groups to start.
3. Select Start.
End of procedure.
STOP PRINTING
To stop printing:
1. Select STOP at the top of the user interface.
2. Select which print groups to stop.
3.
Select Stop.
End of procedure.
OPERATION
111 EPT053091 - Issue 5 - 07 May 2021
To Next Page
Loading...