Donaldson Torit Downflo Evolution DFEP4 - Filter Access Cover Assembly Replacement; Venturi Replacement

12
Venturi Replacement
To replace a damaged venturi:
1. Turn off the collector and Lock-Out all energy sources.
2.
3.
4.
5. Open the control panel access door.
6.
panel, from the control panel access door.
7.
8.
9.
10.
11. Tighten the six thread forming screws to attach the venturi.
12.
13.
14. Close and secure the control panel access door.
15. Return power to the collector and resume DFEP operation.
1. Turn off collector and Lock-Out all energy sources
2.
3.
4. Remove the Access Cover Pin, Clevis and E-Clip from the collector end of the access cover hinge assembly.
5.
the upper and lower Hinge Pin Shoulder Spacers.
6.
After the knob has been hand tightened
(3-turns) a tool assist may be used.
to ensure a dust tight seal.
Step 6
Step 9
Filter Access Cover Assembly Replacement